Terratec AXON AX 50 USB driver 7.04 is a Firmware driver from . It runs on following
operating system: Windows XP / Windows Vista. We recommend always using the most recent driver version available, so check for Terratec AXON AX 50 USB driver new verison
on our site as often as possible.
Do not forget to set a system restore point before installing Terratec AXON AX 50 USB driver 7.04 driver, to avoid problems that may occurs when you install a
wrong driver, or for other OS version etc. If a problem occur than you may restore you computer to previous time, before installing the driver.
Publisher review: Specifications:Front panel1. Socket for the special 13-pin AXON AXK 100 cable (not included) to connect gui-tars/basses with hexaphonic pickup systems (e.g. AXON PU 100 or AXON AIX 101/103).2. 3-digit 7-segment LED display.3. TUNER button with multiple functions:¡ TUNE MODE: A minus sign signals that the device is in TUNE mode. Press the button briefly to activate this mode. Pressing the button again will return it to preset mode.¡ FIRMWARE UPDATE: Press the Tuner button and hold it for around 3 seconds while the device is initialising.¡ BRIGHTNESS: Press and hold the button while the device is in operation. The display will first gradually dim, then gradually brighten again. Release the but-ton at the desired level.4. POWER ON/OFF switches the AC power of the AXON. The LED display is lit when the power is turned on.Rear panel1. 12VAC: Connect the power adapter here (12VAC/1.5A).2. USB: Socket to connect the device to your computer.3. MIDI IN: The AXON receives all incoming Program Change commands, as well as controller data via this input. A MIDI footswitch to change presets can be connected here.4. MIDI THRU: All data arriving at MIDI IN is available in unchanged form here.5. MIDI OUT: All MIDI data generated by your AXON AX 50 USB is available here.6. INST. OUT: The "normal", unmodified pickup signal of your guitar can be sent through the 13-pin cable, making it available at this socket. The pickups PU 100 and AIX101/103 have an input for the pickup signal of your guitar. Use the included cable to connect the pickup output of your guitar to the minijack socket.
Operating system:Windows XP / Windows Vista
Related drivers:View related drivers